CAL CONTROLS

CALgrafix

CAL Controls software CALgrafix is for the controller series 3300, 9300, 9400, 9500 and 9500P. This can be used to program the controllers, but also as a freestanding program for general process monitoring. Here follows a brief presentation, contact OEM Automatic, product area Temperature for additional information.


Program control, series 9500P
CALgrafix supports the program function in 9500P with very high user-friendliness (ramping, soak time, recipe handling etc.).
Program profiles are created through “click-and-drag” and by doing so creating the required control profile. When this has been done values and times can be adjusted to the required function.

Example of functions

Example of displays in CALgrafix

  • Click on the selected instrument to change set point values or configuration
  • Copy an instrument’s settings to another, e.g. when commissioning
    mould jets with several zones
  • Up to 128 instruments can be connected simultaneously
  • Save one or more controllers’ settings in files (recipe handling)
  • Printer function direct on the PC screen
  • Logging/screen dump in real time of temperature or other measurement values
    up to 12 measurement values per diagram
  • Storage of measured loggings in log files
  • Adjustable scale for measurement values/time, adjustable log frequency
  • Configuration, copying of settings
  • “Recipe handling” in files
  • Logging of selectable parameters as actual/set point values, output power in %
    alarm indications
  • Time controlled logging function
  • Simplified programming of ramps/soak times etc. for 9500P and
    CALogix (“drag and drop”)
  • List of settings per controller
  • OPC compatible, connection in network
  • Monitoring of non-CAL clients too (via OPC)
  • Audio files (.wav) can be imported for audible alarms
  • Interconnection of several networks
  • Digital photos (bitmap) can be imported and used as a background
  • Logging can be scaled to be able to show different units, e.g. pressure
    and temperature

Screenshot

Screenpicture on instrument and programming of rampfunction

The instrument is mounted on machines or other
measurement position at the “factory site” where the
machine operator can see process values or set
point values and can directly via the buttons set
another set point value or another configuration.

CAL’s instruments are primarily designed for
temperature control, but can also as here be used
for measurement, control or monitoring of
all applicable process signals where the signal
source is 0-20/4-20 mA or 0-10 V. In addition to
heating control via contactors or solid state relays
there is also an analogue output on 9500P. This
can control e.g. a frequency converter to control a
speed, a pump or a proportional valve which in turn
can control e.g. humidity level, pressure, etc.

Transducer 3C25000K3

Order number

Description

 

For communication

1003GB000

CALgrafix Professional, software for CAL’s controllers and other clients/servers, with OPC-server

3C25000K3

Adapter RS232 to RS485

 

Read more

Selected variant

Selected variant

Specifications

There is no technical data filled. Please contact sales.

Product description

CAL Controls software CALgrafix is for the controller series 3300, 9300, 9400, 9500 and 9500P. This can be used to program the controllers, but also as a freestanding program for general process monitoring. Here follows a brief presentation, contact OEM Automatic, product area Temperature for additional information.


Program control, series 9500P
CALgrafix supports the program function in 9500P with very high user-friendliness (ramping, soak time, recipe handling etc.).
Program profiles are created through “click-and-drag” and by doing so creating the required control profile. When this has been done values and times can be adjusted to the required function.

Example of functions

Example of displays in CALgrafix

  • Click on the selected instrument to change set point values or configuration
  • Copy an instrument’s settings to another, e.g. when commissioning
    mould jets with several zones
  • Up to 128 instruments can be connected simultaneously
  • Save one or more controllers’ settings in files (recipe handling)
  • Printer function direct on the PC screen
  • Logging/screen dump in real time of temperature or other measurement values
    up to 12 measurement values per diagram
  • Storage of measured loggings in log files
  • Adjustable scale for measurement values/time, adjustable log frequency
  • Configuration, copying of settings
  • “Recipe handling” in files
  • Logging of selectable parameters as actual/set point values, output power in %
    alarm indications
  • Time controlled logging function
  • Simplified programming of ramps/soak times etc. for 9500P and
    CALogix (“drag and drop”)
  • List of settings per controller
  • OPC compatible, connection in network
  • Monitoring of non-CAL clients too (via OPC)
  • Audio files (.wav) can be imported for audible alarms
  • Interconnection of several networks
  • Digital photos (bitmap) can be imported and used as a background
  • Logging can be scaled to be able to show different units, e.g. pressure
    and temperature

Screenshot

Screenpicture on instrument and programming of rampfunction

The instrument is mounted on machines or other
measurement position at the “factory site” where the
machine operator can see process values or set
point values and can directly via the buttons set
another set point value or another configuration.

CAL’s instruments are primarily designed for
temperature control, but can also as here be used
for measurement, control or monitoring of
all applicable process signals where the signal
source is 0-20/4-20 mA or 0-10 V. In addition to
heating control via contactors or solid state relays
there is also an analogue output on 9500P. This
can control e.g. a frequency converter to control a
speed, a pump or a proportional valve which in turn
can control e.g. humidity level, pressure, etc.

Transducer 3C25000K3

Order number

Description

 

For communication

1003GB000

CALgrafix Professional, software for CAL’s controllers and other clients/servers, with OPC-server

3C25000K3

Adapter RS232 to RS485

 

Accessories

Related

Product news

Push-In sockets that save both time and space

ComatReleco has launched a new series of push-in sockets specifically designed for time and space savings.

Fiepos
Product news

Fiepos — The power supply of the future

The need for flexible, modular systems shapes machine and system engineering. Decentralization of the system components has proven to be an important factor for success.

Syr-Line time relays
Product news

New “all-round” Syr-Line time relays by Crouzet

Crouzet has honoured the strong Syrelec time relay traditions established in the 1980s, first by Cronos and Cronos 2 series. Now, Crouzet presents the compact and extremely versatile Syr-Line series.

PULS Piano PIC
Product news

The recognized Puls quality for an attractive price

The PIANO PIC series is designed for applications that require reliable DIN rail power supplies, which are focused to deliver the most widely required customer functionalities. Our PIC units offer this simplicity without making compromises on PULS’ renowned qualities; efficiency, service lifetime, reliability and size.

WADI cable gland serie
Product news

New WADI cable gland series from Jacob

The new WADI product family by Jacob features a completely redesigned gland rubber, which allows extensive sealing and tightening area.

PULS redundant
Product news

Redundant systems without redundancy modules

With the CP series, PULS offers a unique feature: Power supplies with an integrated decoupling function based on efficient MOSFET technology. This means there is no need for additional redundancy modules in 1+1 and n+1 redundant systems.

Articles

Selected variant

Select a variant in the list

Contact us

Please contact us for more information.

Send e-mail Send e-mail