AUTOVIMATION
Cooling/heating
If cameras or lasers are used at ambient temperatures of about 45°C, active cooling will be usually required.
autoVimation's water cooling system is suited for industrial applications, for instance allowing the camera use in climate chambers. It consists of water cooling modules for laser- and camera enclosures which are connected through a closed water-circuit with a cooling unit. This unit containing radiator, fans, pump and controller requires a location with moderate ambient temperature not more than 20m away from the enclosure. In return the water cooling set-up allows the operation of laser and cameras at temperatures from down to -50 to up to 200°C without further insulation (depending on application parameters). The water-cooling-controller permanently monitor the camera temperature and provide an alarm output that can be used to protect the camera.
For outside camera use in a moderate climate or in a cold store, heating of the enclosure may be sufficient. For these applications autoVimation provides a controlled heating plate that mounts to the side of the enclosure. Depending on the ambient temperature the heating plate is always heated to the set temperature and can keep the camera above 0°C at temperatures down to -50°C (application dependent). The large size of the heating plate ensures an even temperature distribution, avoiding dew points and condensation inside the camera housing.
Contact OEM sales team for additional info!
- Electric heaters
- Liquid cooling/ heating systems
- Sun roofs
Selected variant
Specifications
There is no technical data filled. Please contact sales.
Downloads
Product description
If cameras or lasers are used at ambient temperatures of about 45°C, active cooling will be usually required.
autoVimation's water cooling system is suited for industrial applications, for instance allowing the camera use in climate chambers. It consists of water cooling modules for laser- and camera enclosures which are connected through a closed water-circuit with a cooling unit. This unit containing radiator, fans, pump and controller requires a location with moderate ambient temperature not more than 20m away from the enclosure. In return the water cooling set-up allows the operation of laser and cameras at temperatures from down to -50 to up to 200°C without further insulation (depending on application parameters). The water-cooling-controller permanently monitor the camera temperature and provide an alarm output that can be used to protect the camera.
For outside camera use in a moderate climate or in a cold store, heating of the enclosure may be sufficient. For these applications autoVimation provides a controlled heating plate that mounts to the side of the enclosure. Depending on the ambient temperature the heating plate is always heated to the set temperature and can keep the camera above 0°C at temperatures down to -50°C (application dependent). The large size of the heating plate ensures an even temperature distribution, avoiding dew points and condensation inside the camera housing.
Contact OEM sales team for additional info!
Related
Small but very efficient gear motors
Transtecno has developed the MiniTecno product range to better meet the needs of customers using small gear motors in a wide range of industries, up to 90 Nm.
New connectors products from Harting
HARTING has introduced a new Push-In connection technology that can reduce assembly times by up to 30% and improve installation flexibility. Read more!
Products for hygienic applications
WIKA's hygienic products take into account the high hygiene, cleaning, and durability requirements of the food and pharmaceutical industries. Read more!
TFT-displays for indoor and outdoor solutions
Constantly evolving applications place ever greater demands on user interfaces. A display for presenting information on the device itself is usually the most natural choice. Read more!
Bopla BoVersa: optimal enclosure for IIoT environments
Comprising three parts, BoVersa can be extensively customized in terms of materials, such as metal and plastic, and colors. It is also easy to integrate various stylish display and keyboard solutions.
Molex mPm valve connectors with WSOR cable
Molex mPm valve plug cables are now also available with WSOR cables. Read more!
