ZEBRA TECHNOLOGIES
Radient eV-CXP CoaXPress frame grabber
The Matrox Radient eV-CXP is a cost-effective CoaXPress (CXP) frame grabber with specific models supporting up to two (Dual) or four (Quad) simultaneous connections. By combining a field proven design with the new CXP interface, the Matrox Radient eV-CXP is a dependable high-performance image capture solution for today and into the foreseeable future.
CoaXPress is a new camera interface standard that takes advantage of common coax cabling to transmit images at rates and distances above and beyond previous standards. With CXP, image data can be transmitted at up to 6.25 Gbps using a single coaxial cable and up to 25 Gbps using four cables to a maximum of 40 meters3. CXP’s high-bandwidth makes it the right match for a new generation of cameras with larger and faster image sensors.
CXP’s full duplex design enables the transmission of camera configuration and control along with image data on the same cable. The Power over CoaXPress (PoCXP) capability further simplifies cabling by providing a camera with up to 13W per cable. This unified cabling facilitates the upgrade of legacy imaging systems from analog to digital.
The Matrox Radient eV-CXP provides two (Dual) or four (Quad) independent CXP connections through BNC connectors. This allows for simultaneous capture from up to two (Dual) or four (Quad) cameras each running at different CXP speeds (i.e., 1.25, 2.5, 3.125, 5.0 or 6.25 Gbps). For high-bandwidth applications, the Radient eV-CXP frame grabber can also capture from a single camera transmitting image data at up to 12.5 Gbps (Dual) or 25 Gbps (Quad) using connection aggregation.
Specifications:
- half-length full-height board
- PCIe® 2.0 x 8 host bus interface
- 1/2/4 GB of DDR3 SDRAM
- CoaXPress (CXP) acquisition
- JIIA NIF-001-2010 Ver. 1.0 certified
- two (Dual) or four (Quad) independent CXP connections (up to 6.25 Gbit/s)
- BNC connector
- Power over CXP (PoCXP) with Safe Power (up to 13W)
- Auto connection speed detection
- LED indicator of connection state
- supports frame and line scan sources
- on-board image reconstruction
- on-board color space conversion
- input formats
- 8/16-bit mono/Bayer
- 24/48-bit packed BGR
- output formats
- 8/16-bit mono
- 24/48-bit packed/planar BGR
- 16-bit YUV
- 16-bit YCbCr
- 32-bit BGRa
- on-board look-up tables (LUTs)
- 8/10/12 bit support
- on-board Bayer conversion
- GB, BG, GR and RG pattern support
- on-board peak location for 3D profiling2
- up to 3 peaks per frame
- maximum frame height of 512 lines
- Up to four (4) DBHD-15 male GPIO connectors (one (1) on main board through MiniDP adaptor cable and three (3) on separate brackets)
- three (3) TTL configurable auxiliary I/Os
- two (2) LVDS auxiliary inputs
- one (1) LVDS auxiliary output
- two (2) opto-isolated auxiliary inputs
- support for one (1) quadrature rotary encoder per CXP connection
- MIL License fingerprint and storage
- 2 or 4 CXP-6 interfaces
- PoCXP - Power over CoaXPress
- Reliable delivery by way of PCIe 2.0 x8
Selected variant
Specifications
| Bustyp | PCI Express 2.0 x8 |
|---|---|
| Height | 111.1 mm |
| Length | 167.6 mm |
| Memory RAM | 1024 MB |
| Temperature range from | 0 °C |
| Temperature range to | 55 °C |
| Width | 18.7 mm |
Product description
The Matrox Radient eV-CXP is a cost-effective CoaXPress (CXP) frame grabber with specific models supporting up to two (Dual) or four (Quad) simultaneous connections. By combining a field proven design with the new CXP interface, the Matrox Radient eV-CXP is a dependable high-performance image capture solution for today and into the foreseeable future.
CoaXPress is a new camera interface standard that takes advantage of common coax cabling to transmit images at rates and distances above and beyond previous standards. With CXP, image data can be transmitted at up to 6.25 Gbps using a single coaxial cable and up to 25 Gbps using four cables to a maximum of 40 meters3. CXP’s high-bandwidth makes it the right match for a new generation of cameras with larger and faster image sensors.
CXP’s full duplex design enables the transmission of camera configuration and control along with image data on the same cable. The Power over CoaXPress (PoCXP) capability further simplifies cabling by providing a camera with up to 13W per cable. This unified cabling facilitates the upgrade of legacy imaging systems from analog to digital.
The Matrox Radient eV-CXP provides two (Dual) or four (Quad) independent CXP connections through BNC connectors. This allows for simultaneous capture from up to two (Dual) or four (Quad) cameras each running at different CXP speeds (i.e., 1.25, 2.5, 3.125, 5.0 or 6.25 Gbps). For high-bandwidth applications, the Radient eV-CXP frame grabber can also capture from a single camera transmitting image data at up to 12.5 Gbps (Dual) or 25 Gbps (Quad) using connection aggregation.
Specifications:
- half-length full-height board
- PCIe® 2.0 x 8 host bus interface
- 1/2/4 GB of DDR3 SDRAM
- CoaXPress (CXP) acquisition
- JIIA NIF-001-2010 Ver. 1.0 certified
- two (Dual) or four (Quad) independent CXP connections (up to 6.25 Gbit/s)
- BNC connector
- Power over CXP (PoCXP) with Safe Power (up to 13W)
- Auto connection speed detection
- LED indicator of connection state
- supports frame and line scan sources
- on-board image reconstruction
- on-board color space conversion
- input formats
- 8/16-bit mono/Bayer
- 24/48-bit packed BGR
- output formats
- 8/16-bit mono
- 24/48-bit packed/planar BGR
- 16-bit YUV
- 16-bit YCbCr
- 32-bit BGRa
- on-board look-up tables (LUTs)
- 8/10/12 bit support
- on-board Bayer conversion
- GB, BG, GR and RG pattern support
- on-board peak location for 3D profiling2
- up to 3 peaks per frame
- maximum frame height of 512 lines
- Up to four (4) DBHD-15 male GPIO connectors (one (1) on main board through MiniDP adaptor cable and three (3) on separate brackets)
- three (3) TTL configurable auxiliary I/Os
- two (2) LVDS auxiliary inputs
- one (1) LVDS auxiliary output
- two (2) opto-isolated auxiliary inputs
- support for one (1) quadrature rotary encoder per CXP connection
- MIL License fingerprint and storage
Related
SH4 safety curtains
Safety curtains and beams provide effective and reliable personal protection and monitoring in a wide range of industrial environments.
2J Antennas: unique innovations and high-quality antenna solutions
Since 2002, 2J Antennas has become a global supplier of antenna solutions, dedicated to developing innovative technologies for an increasingly networked world. Read more!
Spring and motor drums for moving installations
Our supplier Stemmann-Technik (Wabtec Corporation) offers customer-specific cable reels for various applications. The selection includes a wide range of spring and motor cable reels for different purposes. The reels are designed according to customer requirements.
Baco multifunction-buttons
You can save space and time during installation with BACO multi-function buttons! Read more.
Strategic agreement between OEM Automatic and KUKA Nordic
The strategic partnership between OEM Automatic and KUKA Nordic is driving sales momentum. Read more!
OEM Automatic now sells world leading cobots
Thanks to the new cooperation between OEM and KUKA Nordic, we are now able to offer our customers state-of-the-art cobots! Read more about the cooperation!
