• Over 25,000 products in stock
  • clock Stock items ordered before 15:00, will be dispatched on the same day
  • Read more about us
PULS

PULS

Power supply 1-phase, 12 V dc Miniline and Dimension Q Series

  • Output current of 7.5 A or 15 A
  • Bonus power
  • High efficiency
  • Manages high starting/overload currents
  • Space-saving

Product description

Puls series Miniline is characterised by high quality, reliability and long lifetime with high efficiency, which entails low energy loss and low temperatures in the switch cabinet. Dimension Q (15 A) is a new generation of power supply unit with very small construction dimensions and many technical benefits. The unit has low inrush current (even with warm starts), active PFC, which provides a power factor close to one, expanded temperature range and active protection against line transients. Furthermore, there is a relay output (DC OK) that is deactivated when the output voltage deviates more than 10 % from the set value. The bonus power provides an extra 50 % boost with retained 12 V, which is an advantage when connected loads have high starting currents. The unit also has a high short-circuit current that simplifies tripping of secondary fuses. Both the bonus power and short-circuit current are time-limited to 4 seconds to avoid constant overloading of the unit and wiring. For more technical information, consult the general information at the beginning of the power supply section.

 

Variant

ML100.102N Product photo.

ML100.102
PULS PSU 90W 12-15VDC

spinner

Specifications

Input voltage range Auto-select
Number of phases 1
Input voltage AC 100-120, 220-240 V
Input voltage ac min 85 V AC
Input voltage ac max 264 V AC
Input voltage DC 290 V
Input voltage dc min 220 V DC
Input voltage dc max 375 V DC
Inrush current at 120 V ac typical 22 A
Inrush current at 230 V ac typical 37 A
Power Factor at 120 V AC, full load. Typical 0,55
Power Factor at 230 V AC, full load. Typical 0,55
Supply Frequency 50-60 ±6 %
Power Consumption At 120 V AC 1,9 A
Power Consumption At 230 V AC 0,9 A
Type Power Supply AC-DC
Output voltage 12 V DC
Output voltage min 12 V DC
Output voltage max 15 V DC
Output Current 7,5 A
Effect 90 W
Power Reduction Of 60 To 70 ° C 2,5 W/°C
Ripple. max 50 mV pp
Temperature Range Without Derating From -10 °C
Temperature Range Without Derating To 60 °C
Efficiency At 230 V AC, full load. Typical 88,5 %
MTBF (IEC 61709) 230 V AC, Maximum Load, 40 ° C 500000 h
Width 73 mm
Height 75 mm
Depth 103 mm
Weight 0,36 kg
Clamp type Spring-clamp
Series Miniline
Approvals CB, CE, CSA, EAC, GL, UL
Material Protection ABS plastic
Hold-up time at 120 V AC, full load. Typical. 20 ms
Hold-up time at 230 V AC, full load. Typical. 40 ms
IP Class IP20
Active Transient Yes
Contact us

Please contact us for more information.

Send e-mail