PULS
Power supply 3-phase, 24 V dc Dimension C Series
Puls Dimension C is a series of very high quality, reliability and performance.
CT10 has built primary fuses that make it possible to connect the unit without the need for intermediate fuses up to 32 A (UL) which saves space and money.
The efficiency is high over a wide load range, which results in reduced power consumption and longer life regardless of load current. A mean value of the efficiency from 50% to 100% load is 92.6% with a peak value of 93.2%.
The short circuit current is 3 x rated current for 20 ms, which helps secondary fuses. Power boost of 20% enables higher current extraction without voltage drops. This is especially useful during start-ups and to bridge the current peaks in the application. Power can be used continually up to +45°C and short periods from +45 to +60°C.
Active transient ensure operation also in very störrik electrical environment in addition, CT10 active inrush current protection, which means a very low starting current, even if the unit has been in operation for a longer time. Especially useful for redundant / parallel-connected systems.
Power supply connected with 3 stages but can operate on only two phases, taking into account the load and ambient temperature.
We recommend free space of 40 mm above and 20 mm under the power supply, and 5 mm at the sides.
- Output current of 10 A
- Up to 92.9% efficiency
- High reliability
- Integrated primary fuses
Selected variant
Selected variant
Specifications
| Input voltage range | Wide-range |
|---|---|
| Number of phases | 3 |
| Input voltage AC | 380-480 V |
| Input voltage ac min | 323 V AC |
| Input voltage ac max | 576 V AC |
| Inrush current at 400 V ac typical | 4 A |
| Power Factor at 400 V AC, full load. Typical | 0,53 |
| Supply Frequency | 50-60 ±6 % |
| Power consumption at 400 V ac | 0,7 A |
| Type Power Supply | AC-DC |
| Output voltage | 24 V DC |
| Output voltage min | 24 V DC |
| Output voltage max | 28 V DC |
| Output Current | 10 A |
| Effect | 240 W |
| Power Reduction Of 60 To 70 ° C | 6 W/°C |
| Ripple. max | 50 mV pp |
| Temperature Range Without Derating From | -25 °C |
| Temperature Range Without Derating To | 60 °C |
|---|---|
| Efficiency At 400 V AC. Typical | 92,2 % |
| Efficiency At 400 V AC, full load. Typical | 92,8 % |
| Lifetime at 400 V ac, full load and +40 ° C | 54000 h |
| MTBF (IEC 61709) 400 V ac, max loan, +40 °C | 975000 h |
| Width | 62 mm |
| Height | 124 mm |
| Depth | 117 mm |
| Weight | 0,75 kg |
| Clamp type | Screw |
| Series | Dimension C |
| Approvals | ABS, CB, CE, CSA US, cRUus, cULus, EAC, GL |
| Material Protection | Aluminium |
| Hold-up time at 400 V AC, full load. Typical. | 34 ms |
| IP Class | IP20 |
| Active Transient | Yes |
Product description
Puls Dimension C is a series of very high quality, reliability and performance.
CT10 has built primary fuses that make it possible to connect the unit without the need for intermediate fuses up to 32 A (UL) which saves space and money.
The efficiency is high over a wide load range, which results in reduced power consumption and longer life regardless of load current. A mean value of the efficiency from 50% to 100% load is 92.6% with a peak value of 93.2%.
The short circuit current is 3 x rated current for 20 ms, which helps secondary fuses. Power boost of 20% enables higher current extraction without voltage drops. This is especially useful during start-ups and to bridge the current peaks in the application. Power can be used continually up to +45°C and short periods from +45 to +60°C.
Active transient ensure operation also in very störrik electrical environment in addition, CT10 active inrush current protection, which means a very low starting current, even if the unit has been in operation for a longer time. Especially useful for redundant / parallel-connected systems.
Power supply connected with 3 stages but can operate on only two phases, taking into account the load and ambient temperature.
We recommend free space of 40 mm above and 20 mm under the power supply, and 5 mm at the sides.
Related
Fiepos — The power supply of the future
The need for flexible, modular systems shapes machine and system engineering. Decentralization of the system components has proven to be an important factor for success.
The recognized Puls quality for an attractive price
The PIANO PIC series is designed for applications that require reliable DIN rail power supplies, which are focused to deliver the most widely required customer functionalities. Our PIC units offer this simplicity without making compromises on PULS’ renowned qualities; efficiency, service lifetime, reliability and size.
Redundant systems without redundancy modules
With the CP series, PULS offers a unique feature: Power supplies with an integrated decoupling function based on efficient MOSFET technology. This means there is no need for additional redundancy modules in 1+1 and n+1 redundant systems.
Push-In sockets that save both time and space
ComatReleco has launched a new series of push-in sockets specifically designed for time and space savings.
New “all-round” Syr-Line time relays by Crouzet
Crouzet has honoured the strong Syrelec time relay traditions established in the 1980s, first by Cronos and Cronos 2 series. Now, Crouzet presents the compact and extremely versatile Syr-Line series.
New WADI cable gland series from Jacob
The new WADI product family by Jacob features a completely redesigned gland rubber, which allows extensive sealing and tightening area.
