PULS
Redundant module 20 A Dimension Series
12-28 V DC, 2x10 A
The YR20.242 is a redundancy module for building redundant power supply systems. It is equipped with
two input channels and one output. The two inputs are decoupled by MOSFET technology.
In addition to the YR20.242, the YR20.246 is available which is featured with an automated load sharing
between the connected power supplies and functions which monitor defects in the redundancy circuit or too
high output currents, which could prevent redundancy, if one power supply fails.
The YR20.242 utilizes MOSFETs instead of diodes for the decoupling of the two input channels. This reduces the heat generation and the voltage drop between input and output. The redundancy module does not require an additional auxiliary voltage.
Due to the low power losses, the unit is very slender and only requires 32mm width on the DIN-rail. Large
connection terminals allow for a safe and fast installation. The large international approval package makes this unit suitable for nearly every application.
- For N+1 and 1+1 Redundant Systems
- MOSFET transistors
- Minimum power loss
Selected variant
Specifications
| Input voltage DC | 12-28 V |
|---|---|
| Input voltage dc min | 8,4 V DC |
| Input voltage dc max | 36,4 V DC |
| Input current per channel max | 20 A |
| Input current at continuous overload or short circuit max | 2x24 A |
| Type Power Supply | Redundancy modules |
| Output voltage | 24 V DC |
| Output Current | 20 A |
| Output current max | 26 A |
| Temperature Range Without Derating From | -40 °C |
| Temperature Range Without Derating To | 70 °C |
| Life span | 355000 h @ 2x 20 A, 24 V DC, 40 °C |
| MTBF (IEC 61709) | 7895000 h @ 2x 20 A, 24 V DC, 40 °C |
|---|---|
| Width | 32 mm |
| Height | 124 mm |
| Depth | 127 mm |
| Weight | 0,25 kg |
| Series | Dimension Y |
| Approvals | ATEX, CB, CE, CSA, CSA US, UL |
| Material Protection | Aluminium |
| IP Class | IP20 |
| Voltage Drop Over The Semi-Conductor | 110 mV |
Product description
The YR20.242 is a redundancy module for building redundant power supply systems. It is equipped with
two input channels and one output. The two inputs are decoupled by MOSFET technology.
In addition to the YR20.242, the YR20.246 is available which is featured with an automated load sharing
between the connected power supplies and functions which monitor defects in the redundancy circuit or too
high output currents, which could prevent redundancy, if one power supply fails.
The YR20.242 utilizes MOSFETs instead of diodes for the decoupling of the two input channels. This reduces the heat generation and the voltage drop between input and output. The redundancy module does not require an additional auxiliary voltage.
Due to the low power losses, the unit is very slender and only requires 32mm width on the DIN-rail. Large
connection terminals allow for a safe and fast installation. The large international approval package makes this unit suitable for nearly every application.
