Chronos 2 series timer relays for DIN rail mounting with screw terminal connections and these versions have 1 x relay outputs with 8A rated changeover contacts in a 17.5mm wide housing.
Time range is adjustable (in sub ranges) from 0.1 sec to 100 hours using a selector switch and potentiometer on the front face of the device.
The most common supply voltage requirements are covered by the standard units but there are also special versions that offer additional supply voltage options if required.
Some units are single function and some are multi function with the required timing function set by a selector switch on the front face of the device. The available timing functions are defined by a set of letter codes that is common across the whole Crouzet range.
TIMER MUR3 10-264VAC/DC
|Approvals||CE, Lloyd´s, RoHS, UL|
|Breaking capacity||2000 VA / 80W|
|Cable Area With Sleeve||2 x 1,5 mm²|
|Cable Area Without Sleeve||2 x 2,5 mm²|
|Function||A - Delay on energisation, Ac - Timing after closing and opening of control contact, At - Timing on energisation with memory, B - Timing on impulse (one shot), Bw - Pulse output (adjustable), C - Timing after impulse, D - Symmetrical flashing, Di - Symmetrical flashing, H - Timing on energisation - pulse output, Ht - Delay on energisation with memory|
|IP Class Connection||IP20|
|IP Class Front||IP50|
|Output||Relay 1 pole C/O|
|Power Consumption||0,6 W|
|Response Closing||30 ms|
|Response From Stroke||120 ms|
|Supply voltage||12-240V AC/DC|
|Switching Current Max||8 A|
|Temperature Range From||-20 °C|
|Temperature Range From Stock||-30 °C|
|Temperature Range To||60 °C|
|Temperature Stocks To||60 °C|
|Time Range||0,1-1s, 1-10s, 6-60s, 1-10min, 6-60min, 1-10h, 10-100h|
Please contact us for more information.