• Over 25,000 products in stock
  • clock Stock items ordered before 15:00, will be dispatched on the same day
  • Read more about us
CONTA-CLIP

CONTA-CLIP

Pick-off terminals and test adapters

MAG, SMAG, STA, TA, ZTA

  • STA, SMAG compatible with SRK series
  • SMAG extends standard feed-through terminal up to 4 connections
  • STA test adapters for SRK series
  • TA test adapters dfor RK series
  • ZTA Test adaptors for ZIZA/ZRK series

Product description

CONTA-CLIP offers specific and innovative accessories for the SRK I SSL screw connection system.

Pick-off terminals SMAG

  • The SMAG pick-off terminals make possible one or two additional extra wire connectors onto the SRK terminal blocks and therefore extend the standard feed-through terminal by up to four connectors.
  • The SMAGs are mechanically snapped into the SRK terminal blocks.
  • The SMAG busbar is connected via the corresponding base connection of the terminal block, the rated cross section is thereby reduced to the next lower size.

 

Test adapter STA

  • The ST test adapter can be used to quickly and safely test pre-wired terminal blocks.
  •  A test plug block can be mounted with any number of poles using the locking pegs and the STAZP intermediate plate with widths from 1 to 3 mm. The STAZP intermediate plate allows the assembly of a test plug block, which can also be mounted on different block widths (SRK/SSL 2.5 | 4 | 6 | 10).
  • Thanks to its innovative design the STA test adapter can be rotated through 180°. It can therefore also be mounted onto the SRK terminal block, whereby one of the cross-connection channels is already occupied by a cross-connector.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Number of variants matching filter 25/25 |

Variants

Articles Additional information Approvals Connections Contamination degree Cross section single wire from Cross section single wire to Cross section stranded wire from Cross section stranded wire to Cross section stranded with ferrule from Cross section stranded with ferrule to Cross-Section EAC test standard Flamklass Height Height TS 35/7.5 Length Load Current Max Mounting Operating temperature to Overvoltage category Pack Size Pitch Plug gauge acc. EN 60 947-1 Rated Current IEC Rated impulse voltage Rated wire cross section from (AWG) Rated wire cross section to (AWG) Rated Voltage IEC Screw size Screw type Stripping Length Torque max Torque Min Type of terminal Weight Width
for SRK 4/2A EAC 1 3 0,2 mm² 4 mm² 0,2 mm² 4 mm² 0,2 mm² 2,5 mm² 2,5 mm² TR ZU 004/2011 UL94-V0 26,7 mm 53 mm 37,8 mm 32 A 120 °C III 10 A3 24 A 8 kV 22 12 800 V M 2,5 Slotted 10 mm 0,8 Nm 0,4 Nm Screw Terminals, DIN Rail terminals 6,1 g 5,9 mm
for SRK 6/2A EAC 1 3 0,2 mm² 6 mm² 0,2 mm² 6 mm² 0,2 mm² 4 mm² 4 mm² TR ZU 004/2011 UL94-V0 29,2 mm 55,5 mm 38,5 mm 32 A 120 °C III 10 A4 24 A 8 kV 22 11 800 V M 3 Slotted 10 mm 1 Nm 0,5 Nm Screw Terminals, DIN Rail terminals 7,3 g 6,6 mm
for SRK 10/2A EAC 1 3 0,2 mm² 10 mm² 0,2 mm² 10 mm² 0,2 mm² 6 mm² 10 mm² TR ZU 004/2011 UL94-V0 29,7 mm 56 mm 38,5 mm 32 A 120 °C III 10 A5 24 A 8 kV 22 8 800 V M 3,5 Slotted 10 mm 2 Nm 1,2 Nm Screw Terminals, DIN Rail terminals 8,3 g 8,3 mm
for SRK 16/2A EAC 1 3 2 mm² 10 mm² 2 mm² 10 mm² 2 mm² 6 mm² 6 mm² TR ZU 004/2011 UL94-V0 29,7 mm 60 mm 40 mm 57 A 120 °C III 10 A5 41 A 8 kV 22 8 1000 V M 3,5 Slotted 10 mm 2 Nm 12 Nm Screw Terminals, DIN Rail terminals 10,94 g 8,3 mm
for SRK 35/2A EAC 1 3 2 mm² 10 mm² 2 mm² 10 mm² 2 mm² 6 mm² 6 mm² TR ZU 004/2011 UL94-V0 30,7 mm 65 mm 43,7 mm 57 A 120 °C III 50 A5 41 A 8 kV 22 8 1000 V M 3,5 Slotted 10 mm 2 Nm 12 Nm Screw Terminals, DIN Rail terminals 7,22 g 8,3 mm
EAC 1 3 0,2 mm² 10 mm² 0,2 mm² 10 mm² 0,2 mm² 10 mm² 10 mm² TR ZU 004/2011 UL94-V2 34 mm 50 mm 57 A On terminal 105 °C III 10 A5 57 A 6 kV 22 8 1000 V M 4 Slotted 12 mm 2 Nm 1,2 Nm Screw Terminals, DIN Rail terminals 12,2 g 10 mm
EAC 1 3 0,2 mm² 10 mm² 0,2 mm² 10 mm² 0,2 mm² 10 mm² 10 mm² TR ZU 004/2011 UL94-V2 34 mm 50 mm 57 A On terminal 105 °C III 10 A5 57 A 6 kV 22 8 1000 V M 4 Slotted 12 mm 2 Nm 1,2 Nm Screw Terminals, DIN Rail terminals 12,2 g 10 mm
EAC 1 3 0,2 mm² 10 mm² 0,2 mm² 10 mm² 0,2 mm² 10 mm² 10 mm² TR ZU 004/2011 UL94-V2 34 mm 54,5 mm 57 A On terminal 105 °C III 10 A5 57 A 6 kV 22 8 1000 V M 4 Slotted 12 mm 2 Nm 1,2 Nm Screw Terminals, DIN Rail terminals 12,6 g 10 mm
for SRK 2,5 on busbar 0,5 mm² 1 mm² UL94-V2 70 mm 120 °C 10 5 mm Screw Terminals, DIN Rail terminals 7,3 g
STA spacer plate 1mm UL94-V2 70 mm 120 °C 10 1 mm Screw Terminals, DIN Rail terminals 1,2 g
STA spacer plate 3mm UL94-V2 70 mm 120 °C 10 3 mm Screw Terminals, DIN Rail terminals 2,4 g
for RK 2,5 on busbar 0,5 mm² 1 mm² UL94-V2 37,3 mm 105 °C 10 5 mm 5 mm 4,77 g
for RK 2,5 on cross-connector 0,5 mm² 1 mm² UL94-V2 37,3 mm 105 °C 10 5 mm 5 mm 3,47 g
for RK 2,5-4 on busbar 0,5 mm² 1 mm² UL94-V2 37,3 mm 105 °C 10 6 mm 5 mm 5,4 g
for RK 2,5-4 on cross-connector 0,5 mm² 1 mm² UL94-V2 37,3 mm 105 °C 10 6 mm 5 mm 4,02 g
for RK 6-10 on busbar 0,5 mm² 1 mm² UL94-V2 37,3 mm 105 °C 10 8 mm 5 mm 5,8 g
for RK 6-10 on cross-connector 0,5 mm² 1 mm² UL94-V2 37,3 mm 105 °C 10 8 mm 5 mm 3 g
for RKD 4 on screw 0,5 mm² 1 mm² UL94-V2 37,3 mm 105 °C 10 5 mm 5 mm 9,6 g
for RKD 4 on screw 0,5 mm² 1 mm² UL94-V2 37,3 mm 105 °C 10 6 mm 5 mm 10 g
for tension-spring-terminals 1,5 mm² 0,5 mm² 1 mm² UL94-V2 32,3 mm 105 °C 10 5,1 mm 5 mm 7,12 g
for tension-spring-terminals 2,5 mm² 0,5 mm² 1 mm² UL94-V2 32,3 mm 105 °C 10 5,1 mm 5 mm 2,8 g
for tension-spring terminals 4 mm² 0,5 mm² 1 mm² UL94-V2 32,3 mm 105 °C 10 6,1 mm 5 mm 2,8 g
for tension-spring terminals 6 mm² 0,5 mm² 1 mm² UL94-V2 32,3 mm 105 °C 10 8,1 mm 5 mm 3,08 g
for tension-spring terminals 10 mm² 0,5 mm² 1 mm² UL94-V2 32,3 mm 105 °C 10 10,1 mm 5 mm 3,8 g
for tension-spring terminals 16 mm² 0,5 mm² 1 mm² UL94-V2 32,3 mm 105 °C 10 12 mm 5 mm 4,14 g

Variant

17120.2

17120.2
SMAG 4/2.5, Pick off terminal for SRK/SSL4

spinner symbol

Specifications

Additional information for SRK 4/2A
Approvals EAC
Color Beige
Connections 1
Contamination degree 3
Country of origin DE
Cross section single wire from 0,2 mm²
Cross section single wire to 4 mm²
Cross section stranded wire from 0,2 mm²
Cross section stranded wire to 4 mm²
Cross section stranded with ferrule from 0,2 mm²
Cross section stranded with ferrule to 2,5 mm²
Cross-Section 2,5 mm²
EAC test standard TR ZU 004/2011
Flamklass UL94-V0
Height 26,7 mm
Height TS 35/7.5 53 mm
Insulation Material Polyamide 6.6
Length 37,8 mm
Load Current Max 32 A
Operating temperature from -40 °C
Operating temperature to 120 °C
Overvoltage category III
Pack Size 10
Plug gauge acc. EN 60 947-1 A3
Rated Current IEC 24 A
Rated impulse voltage 8 kV
Rated wire cross section from (AWG) 22
Rated wire cross section to (AWG) 12
Rated Voltage IEC 800 V
Screw size M 2,5
Screw type Slotted
Stripping Length 10 mm
Tariff code 85369010
Torque max 0,8 Nm
Torque Min 0,4 Nm
Type of terminal Screw Terminals, DIN Rail terminals
Weight 6,1 g
Width 5,9 mm
Contact us

Please contact us for more information.

Send e-mail Send e-mail