CONTA-CLIP
3-wire installation hybrid terminals - DLIS 2.5mm²
DLI, DLIS
The DLI, DLIS range of installation terminals enable the ability to distribute power in a small footprint and gives the ability to disconnect the neutral connections.
To comply to VDE 100 (IEC 364) and VDE 0108, which stipulates the requirement that a circuit's association must be clearly detectable.
It is also required that an insulation test can be performed on each terminal without disconnecting the Neutral wire from the terminal blocks.
This is a specific requirement for public buildings such as hospitals, schools, airports, office buildings and institutions.
The terminals support the use of 10 x 3 busbar and is positioned on the outside of the terminals, the bar is held in place using the HP support plates. A sliding contact that contacts both sides of the busbar is used to connect and disconnect from the busbar.
This sliding contact permits functional testing independent of the operational mode.
- Cross connectable
- Phase, Neutral and PE in one terminal
- 10 x 3 busbar connections
- Slide neutral disconnet
- Colour coded
Selected variant
Specifications
| Color | Beige |
|---|---|
| Connections | 4 |
| Contamination degree | 3 |
| Country of origin | CZ |
| Cross connect channels | 2 |
| Cross section single wire from | 0.2 mm² |
| Cross section single wire to | 4 mm² |
| Cross section stranded wire from | 0.2 mm² |
| Cross section stranded wire to | 4 mm² |
| Cross section stranded with ferrule from | 0.2 mm² |
| Cross section stranded with ferrule to | 2.5 mm² |
| Cross-Section | 2.5 mm² |
| Flamklass | UL94-V2 |
| Height TS 35/7.5 | 53 mm |
| Insulation Material | Polyamide 6.6 |
| Length | 90.5 mm |
| Mounting | TS 35/7,5 |
| Operating temperature from | -40 °C |
| Operating temperature to | 105 °C |
| Overvoltage category | III |
|---|---|
| Pack Size | 50 |
| Plug gauge acc. EN 60 947-1 | A3 |
| Rated Current IEC | 24 A |
| Rated impulse voltage | 4 kV |
| Rated wire cross section from (AWG) | 22 |
| Rated wire cross section to (AWG) | 14 |
| Rated Voltage IEC | 400 V |
| Screw size | M 2,5 |
| Screw type | Slotted |
| Special connections | Busbar 10 x 3mm |
| Stripping Length | 8 mm |
| Tariff code | 85369010 |
| Torque max | 0.8 |
| Torque Min | 0.4 |
| Type of terminal | Screw Terminals, DIN Rail terminals |
| Weight | 26.8 g |
| Width | 6 mm |
Product description
The DLI, DLIS range of installation terminals enable the ability to distribute power in a small footprint and gives the ability to disconnect the neutral connections.
To comply to VDE 100 (IEC 364) and VDE 0108, which stipulates the requirement that a circuit's association must be clearly detectable.
It is also required that an insulation test can be performed on each terminal without disconnecting the Neutral wire from the terminal blocks.
This is a specific requirement for public buildings such as hospitals, schools, airports, office buildings and institutions.
The terminals support the use of 10 x 3 busbar and is positioned on the outside of the terminals, the bar is held in place using the HP support plates. A sliding contact that contacts both sides of the busbar is used to connect and disconnect from the busbar.
This sliding contact permits functional testing independent of the operational mode.
Related
LOOP Heater for optimal heat distribution
Thanks to their loop design, LOOP heating elements offer excellent heating performance and ensure optimal heat distribution. Read more now!
Quality solutions for motion controls
TER - Tecno Elettrica Ravasi, is our Italian supplier specializing in the manufacture of control stations. TER has over 60 years of experience in the manufacture of control stations.
Compact electronic overcurrent protection PISA-M
PISA-M is a 4-channel electronic fuse for 12 and 24 V DC systems. The smallest 4-channel electronic fuse with a width of only 22.5 mm!
An effective solution Delcon CRA5
Delcon's CRA5 plug-in relay revolutionizes the control of difficult-to-handle DC loads. Inductive loads, frequent switching, and high DC voltages are a piece of cake for these relays.
LOCC-Box Mini
The Lütze LOCC-Box is an intelligent electronic overcurrent protection device that provides reliable protection for 12/24 V DC systems in a narrow housing measuring just 8.1 mm. Integrated + and - terminals save space on the DIN rail.
DF Electric – new supplier for fuse solutions
DF Electric is specialized in the manufacturing of fuse links, fuse holders and control transformers since 1987. Presently the company is leading the Spanish market and is also very active in many export markets due to its competitive range of products.
