PULS

Power supply 1-phase, 48 V dc Dimension C Series

Puls Dimension C-series stands for cost optimization without compromising quality, reliability or performance. CPS20.481 high efficiency over a wide load range, which results in reduced power consumption and longer life regardless of load current. An average efficiency is 92.8% with a peak value of 93.9%. In addition, power losses very low at idle, only 2.4 W at 230 V ac.

Short-circuit currents.
CPS20 can leave short-circuit currents which is 4 times the nominal current for 15 ms, which helps secondary fuses and achieve selectivity.

Hiccup
Plus.

With new pulse short circuit protection you get optimum protection. The unit leaves a very high short circuit that solves fuses and provides sufficient starting current for example dc motors. If the output voltage drops below 25 V DC will be left 2x rated current for 2 seconds, then close the unit by the end to make a new restart attempts after about 18 seconds. This feature ensures a high short-circuit/overload current while avoiding a constant high current that can lead to heat and component damage.

Technical advantages. CPS20 has active power factor correction (PFC) and active power inrush protection that effectively reduces start currents which are ideal if several units are connected in the same phase or if the supply is current limited through example. AC UPS. The protection is always active, regardless of the temperature. DC-OK output, wide temperature range, a large number of approvals and transient filter which ensures operation in störrik electrical environment makes the unit suitable for virtually all installations.

 

For approved cooling, we recommend free space of 40 mm above. 20 mm under and 5 mm on the sides. (15 mm if there is another power supply)

 

Stripping sec. fuses

 

0.75 mm2

1.0 mm2

1.5 mm2

2.5 mm2

C-2A

74 m

98 m

134 m

198 m

C-3A

57 m

74 m

106 m

168 m

C-4A

43 m

56 m

73 m

114 m

C-6A

11 m

16 m

23 m

33 m

C-8A

1 m

1 m

2 m

3 m

B-6A

19 m

36 m

51 m

82 m

B-10A

9 m

12 m

18 m

27 m

B-13A

7 m

10 m

16 m

24 m

  

 

 

 

  • Output current of 10 A
  • Up to 94% efficiency
  • Active PFC
  • High short-circuit currents
  • Hiccup Plus

Selected variant

Selected variant

Specifications

Input voltage range Wide-range
Number of phases 1
Input voltage AC 100-240 V
Input voltage ac min 100 V AC
Input voltage ac max 264 V AC
Inrush current at 120 V ac typical 9 A
Input current at 230 V ac typical 7 A
Power Factor at 120 V AC, full load. Typical 0,99
Power Factor at 230 V AC, full load. Typical 0,95
Supply Frequency 50-60 ±6 %
Power Consumption At 120 V AC 4,36 A
Power Consumption At 230 V AC 2,33 A
Type Power Supply AC-DC
Output voltage 48 V DC
Output voltage min 48 V DC
Output voltage max 56 V DC
Output Current 10 A
Effect 480 W
Power Reduction Of 60 To 70 ° C 12 W/°C
Ripple. max 50 mV pp
Temperature Range Without Derating From -25 °C
Temperature Range Without Derating To 60 °C
Efficiency At 120 V AC, full load. Typical 92,6 %
Efficiency At 230 V AC. Typical 92,8 %
Efficiency At 230 V AC, full load. Typical 93,9 %
Lifetime at 120 V ac, full load and +40 ° C 70000 h
Lifetime at 230 V ac, full load and +40 ° C 87000 h
MTBF (IEC 61709) 230 V AC, Maximum Load, 40 ° C 537000 h
Width 65 mm
Height 124 mm
Depth 117 mm
Weight 1 kg
Clamp type Screw
Series Dimension C
Approvals ABS, ATEX, CB, CE, CSA US, cRUus, cULus, GL, IECEx
DC relay output Yes
Material Protection Aluminium
Hold-up time at 120 V AC, full load. Typical. 26 ms
Hold-up time at 230 V AC, full load. Typical. 26 ms
IP Class IP20
Active Transient Yes

Product description

Puls Dimension C-series stands for cost optimization without compromising quality, reliability or performance. CPS20.481 high efficiency over a wide load range, which results in reduced power consumption and longer life regardless of load current. An average efficiency is 92.8% with a peak value of 93.9%. In addition, power losses very low at idle, only 2.4 W at 230 V ac.

Short-circuit currents.
CPS20 can leave short-circuit currents which is 4 times the nominal current for 15 ms, which helps secondary fuses and achieve selectivity.

Hiccup
Plus.

With new pulse short circuit protection you get optimum protection. The unit leaves a very high short circuit that solves fuses and provides sufficient starting current for example dc motors. If the output voltage drops below 25 V DC will be left 2x rated current for 2 seconds, then close the unit by the end to make a new restart attempts after about 18 seconds. This feature ensures a high short-circuit/overload current while avoiding a constant high current that can lead to heat and component damage.

Technical advantages. CPS20 has active power factor correction (PFC) and active power inrush protection that effectively reduces start currents which are ideal if several units are connected in the same phase or if the supply is current limited through example. AC UPS. The protection is always active, regardless of the temperature. DC-OK output, wide temperature range, a large number of approvals and transient filter which ensures operation in störrik electrical environment makes the unit suitable for virtually all installations.

 

For approved cooling, we recommend free space of 40 mm above. 20 mm under and 5 mm on the sides. (15 mm if there is another power supply)

 

Stripping sec. fuses

 

0.75 mm2

1.0 mm2

1.5 mm2

2.5 mm2

C-2A

74 m

98 m

134 m

198 m

C-3A

57 m

74 m

106 m

168 m

C-4A

43 m

56 m

73 m

114 m

C-6A

11 m

16 m

23 m

33 m

C-8A

1 m

1 m

2 m

3 m

B-6A

19 m

36 m

51 m

82 m

B-10A

9 m

12 m

18 m

27 m

B-13A

7 m

10 m

16 m

24 m

  

 

 

 

Accessories

Related products

Related

Fiepos
Product news

Fiepos — The power supply of the future

The need for flexible, modular systems shapes machine and system engineering. Decentralization of the system components has proven to be an important factor for success.

PULS Piano PIC
Product news

The recognized Puls quality for an attractive price

The PIANO PIC series is designed for applications that require reliable DIN rail power supplies, which are focused to deliver the most widely required customer functionalities. Our PIC units offer this simplicity without making compromises on PULS’ renowned qualities; efficiency, service lifetime, reliability and size.

PULS redundant
Product news

Redundant systems without redundancy modules

With the CP series, PULS offers a unique feature: Power supplies with an integrated decoupling function based on efficient MOSFET technology. This means there is no need for additional redundancy modules in 1+1 and n+1 redundant systems.

Product news

Push-In sockets that save both time and space

ComatReleco has launched a new series of push-in sockets specifically designed for time and space savings.

Syr-Line time relays
Product news

New “all-round” Syr-Line time relays by Crouzet

Crouzet has honoured the strong Syrelec time relay traditions established in the 1980s, first by Cronos and Cronos 2 series. Now, Crouzet presents the compact and extremely versatile Syr-Line series.

WADI cable gland serie
Product news

New WADI cable gland series from Jacob

The new WADI product family by Jacob features a completely redesigned gland rubber, which allows extensive sealing and tightening area.

Articles Output voltage Input voltage AC Input voltage DC Clamp type Effect Output Current
48 V DC 100-240 V Screw 480 W 10 A
48 V DC 110-300 V Screw 480 W 10 A

Selected variant

Select a variant in the list

Contact us

Please contact us for more information.

Send e-mail Send e-mail