PULS
FIEPOS eFuse
100-240 V AC/24-28 V DC, 300 and 500 W
The FPS300 is an industrialgrade power supply for 1-phase networks incorporated in to a rugged wall- mount housing with IP65/67 protection.
It provides two to four stabilized outputs that is galvanically separated from the input.
The negative potential of the outputs is permanently connected to PE within the unit.
The most outstanding features of the FPS series are the compact size, the wide operational temperature range, the extremely low input inrush current and the very high efficiencies, which are achieved by various design technologies.
Large sized output capacitors can absorb and store regenerative energy from breaking motors.
- IP65/IP67
- Up to 4 switchable outputs
- Output power 360/600 W
- 600/1000 Wpeak 5s
- IO-Link or DC-OK relay
Selected variant
Specifications
| Number of phases | 1 |
|---|---|
| Input voltage AC | 100-240 V |
| Input voltage ac min | 85 V AC |
| Input voltage ac max | 264 V AC |
| Input voltage DC | 110-300 V |
| Input voltage dc min | 88 V DC |
| Input voltage dc max | 360 V DC |
| Inrush current at 120 V ac typical | 3 A |
| Inrush current at 230 V ac typical | 6 A |
| Power Factor at 120 V AC, full load. Typical | 0,99 |
| Power Factor at 230 V AC, full load. Typical | 0,97 |
| Supply Frequency | 50-60 Hz ±6 % |
| Power Consumption At 120 V AC | 3,2 A |
| Power Consumption At 230 V AC | 1,68 A |
| Output voltage | 24 V DC |
| Output voltage min | 24 V DC |
| Output voltage max | 28 V DC |
| Output Current per channel | 10 A |
| Effect | 300 W |
| Total output power <+45°C | 360 W |
| Total output power <+55°C | 300 W |
| Total output power <+70°C | 150 W |
| Total output power <5 s, <+55°C | 600 W |
| Total output power <5 s, <+70°C | 300 W |
| Power drop from +55 °C to + 70 °C | 10 W/°C |
| Ripple. max | 50 mV pp |
|---|---|
| Temperature Range Without Derating From | -25 °C |
| Temperature Range Without Derating To | 55 °C |
| Back-feeding loads | 35V / 4 J |
| Efficiency At 120 V AC, full load. Typical | 94,3 % |
| Efficiency At 230 V AC. Typical | 94,6 % |
| Efficiency At 230 V AC, full load. Typical | 95,7 % |
| Width | 182 mm |
| Height | 183 mm |
| Depth | 59 mm |
| Weight | 1,2 kg |
| Output connectors | 1x 7/8" |
| DC-OK/IO-link connector | M12-A |
| Input connector | 7/8" |
| Series | FIEPOS eFuse |
| Approvals | CB, CE, UKCA, cULus |
| DC relay output | No |
| IO-LINK | Yes |
| Material Protection | Aluminium |
| Hold-up time at 120 V AC, full load. Typical. | 37 ms |
| Hold-up time at 230 V AC, full load. Typical. | 37 ms |
| IP Class | IP65, IP67 |
| Active Transient | Yes |
Product description
The FPS300 is an industrialgrade power supply for 1-phase networks incorporated in to a rugged wall- mount housing with IP65/67 protection.
It provides two to four stabilized outputs that is galvanically separated from the input.
The negative potential of the outputs is permanently connected to PE within the unit.
The most outstanding features of the FPS series are the compact size, the wide operational temperature range, the extremely low input inrush current and the very high efficiencies, which are achieved by various design technologies.
Large sized output capacitors can absorb and store regenerative energy from breaking motors.
