LÜTZE
Lütze J- and K-type signal converters. Input can be selected between 8 temperature ranges, output options include common standard signals. Converter is adjusted with DIP-switch and it is self-calibrating, which ensures effortless installation.
The converter features 3-way galvanic isolation, each terminal can be connected by jumper comb. Extremely compact design, width of 6,2mm only. Can be installed in any position. Equipped with either push-in or screw terminals.
Approvals | CE, cULus, RoHS |
---|---|
Cross Section Max | 2,5 mm² |
Cross section min | 0,25 mm² |
Depth | 73 mm |
Height | 93 mm |
Insulation voltage in/out | 2500 V |
IP Class | IP20 |
Linearity | 0,1 % FSR |
Load Impedance | 500 Ω |
Load impedance power | <500 Ω |
Load impedance voltage | Min. 2 kΩ |
Manual switch | Yes |
Reaction time | 60 ms |
---|---|
Supply voltage | 24 V AC/DC |
Switching Frequency max | 10 Hz @ 3 dB |
Temperature coefficient | <150 ppm/° K FSR |
Temperature range bearing, from | -40 °C |
Temperature range bearing, to | 80 °C |
Temperature range from | -25 °C |
Temperature range to | 60 °C |
Weight | 30 g |
Width | 6,2 mm |
Lütze J- and K-type signal converters. Input can be selected between 8 temperature ranges, output options include common standard signals. Converter is adjusted with DIP-switch and it is self-calibrating, which ensures effortless installation.
The converter features 3-way galvanic isolation, each terminal can be connected by jumper comb. Extremely compact design, width of 6,2mm only. Can be installed in any position. Equipped with either push-in or screw terminals.