WEST
West - P6100, P8100, P4100, temperature and process controllers
With their improved interface, technical functionality and field flexibility, the WEST 6100, 8100 and 4100 give you the best comprehensive control for most temperature and process control loops.
They have a universal input and are available with a red and green displays. Plug-in modules allow up to 2 alarm relays (latching or non-latching), PV retransmission, remtote set point (RSP) or transmitter PSU
Specification
Features: |
|
|
Control types | Full PID with Pre-tune, Self-tune, manual tuning, or On-Off control. |
|
Auto/Manual | Selectable from front panel or via digital input, with bumpless transfer. |
|
Output configuration | Up to 3 possible, for control, alarm, 24VDC transmitter power supply or retransmit of process value or setpoint. |
|
Alarm 1 & 2 types | Process high, process low, SP deviation, band, logical OR / AND. |
|
Human Interface | 4 button operation, dual 4 digit 10mm & 8mm high (6100+, 8100+) and 13mm & 10mm high (4100+) LED displays, |
|
PC configuration | Off-line configuration from PC serial port to dedicated config socket (comms option not required). |
|
|
|
|
Input: |
|
|
Thermocouple | J, K, C, R, S, T, B, L, N & PtRh20%vsPtRh40%. |
|
RTD | 3 Wire PT100, 50Ω per lead maximum (balanced) |
|
DC Linear | 0 to 20mA, 4 to 20mA, 0 to 50mV, 10 to 50mV, 0 to 5V, 1 to 5V, 0 to 10V, 2 to 10V. |
|
Impedance | >10MΩ for Thermocouple and mV ranges, 47KΩ for V ranges and 5Ω for mA ranges |
|
Accuracy | ±0.1% of input range ±1 LSD (T/C CJC better than 1°C) |
|
Sampling | 4 per second, 14 bit resolution approximately |
|
Sensor break detection | <2 seconds (except zero based DC ranges), control O/P’s turn off |
|
|
|
|
Outputs & Operations: |
|
|
Control & alarm relays | Contacts SPDT 2 Amp resistive at 240V AC, >500,000 operations |
|
Control SSR driver outputs | Drive capability >10V DC in 500 minimum |
|
Triac outputs | 0.01 to 1 Amp AC, 20 to 280Vrms, 47 to 63Hz |
|
DC linear outputs | 0 to 20mA, 4 to 20mA into 500Ω max, 0 to 10V, 2 to 10V, 0 to 5V into 500Ω min. |
|
Transmitter power supply | Output 24VDC (nominal) into 910Ω minimum to power external devices |
|
Communications | 2 Wire RS485, 1200 to 19200 Baud, Modbus and ASCII protocol (selectable) |
|
Digital input | Selects between 2 setpoints or Auto/Manual control. |
|
Remote setpoint input | 0 to 20mA, 4 to 20mA, 0 to 5V, 1 to 5V, 0 to 10V or 2 to 10V. |
|
|
|
|
Operating & Environmental: |
|
|
Temperature & RH | 0 to 55°C (-20 to 80°C storage), 20% to 95% RH non-condensing |
|
Power supply | 100 to 240V 50/60Hz 7.5VA (optional 20 to 48V AC 7.5VA/22 to 65V DC 5 watts) |
|
Front panel protection | IEC IP66 (Behind panel protection is IP20) |
|
Standards | CE, UL & ULC recognised |
|
Dimensions
6100+
|
8100+
|
4100+
|
Wiring
6100+
|
8100+/4100+
|
Part no. configurator
- Jumperless configuration
- Auto detected hardware
- Process and loop alarms
- Modbus and ASCII comms
Selected variant
Specifications
| IP Class Front | IP66 |
|---|---|
| Mounting | Panel mount |
| Panel size | 96x96 mm |
| Power Supply AC max | 240 V |
| Power Supply AC min | 100 V |
Product description
With their improved interface, technical functionality and field flexibility, the WEST 6100, 8100 and 4100 give you the best comprehensive control for most temperature and process control loops.
They have a universal input and are available with a red and green displays. Plug-in modules allow up to 2 alarm relays (latching or non-latching), PV retransmission, remtote set point (RSP) or transmitter PSU
Specification
Features: |
|
|
Control types | Full PID with Pre-tune, Self-tune, manual tuning, or On-Off control. |
|
Auto/Manual | Selectable from front panel or via digital input, with bumpless transfer. |
|
Output configuration | Up to 3 possible, for control, alarm, 24VDC transmitter power supply or retransmit of process value or setpoint. |
|
Alarm 1 & 2 types | Process high, process low, SP deviation, band, logical OR / AND. |
|
Human Interface | 4 button operation, dual 4 digit 10mm & 8mm high (6100+, 8100+) and 13mm & 10mm high (4100+) LED displays, |
|
PC configuration | Off-line configuration from PC serial port to dedicated config socket (comms option not required). |
|
|
|
|
Input: |
|
|
Thermocouple | J, K, C, R, S, T, B, L, N & PtRh20%vsPtRh40%. |
|
RTD | 3 Wire PT100, 50Ω per lead maximum (balanced) |
|
DC Linear | 0 to 20mA, 4 to 20mA, 0 to 50mV, 10 to 50mV, 0 to 5V, 1 to 5V, 0 to 10V, 2 to 10V. |
|
Impedance | >10MΩ for Thermocouple and mV ranges, 47KΩ for V ranges and 5Ω for mA ranges |
|
Accuracy | ±0.1% of input range ±1 LSD (T/C CJC better than 1°C) |
|
Sampling | 4 per second, 14 bit resolution approximately |
|
Sensor break detection | <2 seconds (except zero based DC ranges), control O/P’s turn off |
|
|
|
|
Outputs & Operations: |
|
|
Control & alarm relays | Contacts SPDT 2 Amp resistive at 240V AC, >500,000 operations |
|
Control SSR driver outputs | Drive capability >10V DC in 500 minimum |
|
Triac outputs | 0.01 to 1 Amp AC, 20 to 280Vrms, 47 to 63Hz |
|
DC linear outputs | 0 to 20mA, 4 to 20mA into 500Ω max, 0 to 10V, 2 to 10V, 0 to 5V into 500Ω min. |
|
Transmitter power supply | Output 24VDC (nominal) into 910Ω minimum to power external devices |
|
Communications | 2 Wire RS485, 1200 to 19200 Baud, Modbus and ASCII protocol (selectable) |
|
Digital input | Selects between 2 setpoints or Auto/Manual control. |
|
Remote setpoint input | 0 to 20mA, 4 to 20mA, 0 to 5V, 1 to 5V, 0 to 10V or 2 to 10V. |
|
|
|
|
Operating & Environmental: |
|
|
Temperature & RH | 0 to 55°C (-20 to 80°C storage), 20% to 95% RH non-condensing |
|
Power supply | 100 to 240V 50/60Hz 7.5VA (optional 20 to 48V AC 7.5VA/22 to 65V DC 5 watts) |
|
Front panel protection | IEC IP66 (Behind panel protection is IP20) |
|
Standards | CE, UL & ULC recognised |
|
Dimensions
6100+
|
8100+
|
4100+
|
Wiring
6100+
|
8100+/4100+
|
Part no. configurator
Related
Push-In sockets that save both time and space
ComatReleco has launched a new series of push-in sockets specifically designed for time and space savings.
Fiepos — The power supply of the future
The need for flexible, modular systems shapes machine and system engineering. Decentralization of the system components has proven to be an important factor for success.
New “all-round” Syr-Line time relays by Crouzet
Crouzet has honoured the strong Syrelec time relay traditions established in the 1980s, first by Cronos and Cronos 2 series. Now, Crouzet presents the compact and extremely versatile Syr-Line series.
The recognized Puls quality for an attractive price
The PIANO PIC series is designed for applications that require reliable DIN rail power supplies, which are focused to deliver the most widely required customer functionalities. Our PIC units offer this simplicity without making compromises on PULS’ renowned qualities; efficiency, service lifetime, reliability and size.
New WADI cable gland series from Jacob
The new WADI product family by Jacob features a completely redesigned gland rubber, which allows extensive sealing and tightening area.
Redundant systems without redundancy modules
With the CP series, PULS offers a unique feature: Power supplies with an integrated decoupling function based on efficient MOSFET technology. This means there is no need for additional redundancy modules in 1+1 and n+1 redundant systems.
