CONTA-CLIP

Interface break out modules

FBK-C, FBK-CZ

 Interface modules allow you to connect standard pre-moulded cable connector sets onto screw or tension-spring PCB terminals.  

 

The connections of the multi-pole or high-pole connectors are configured one to-one to the PCB – from the individual wires via connectors to pre-assembled cables. This means the  assembly time and associated costs are reduced.

 

The compact design of the interface modules, and the clear terminal labelling, and their simple assembly on TS 32 or TS 35 rails, this system represents an attractive alternative to a pure individual wire approach.

 

RJ 45 and USB use the standardized RJ45 Ethernet and USB connectors from computer components, Ethernet ready devices or modems and have screw PCB terminals.

The RJS45-SH is even more compact and uses push in connectors and has the added spring shield clip for locally grounding the cable.

A new adddition to the range is the Industrial SPE (single Pair Ethertnet) interface with spring shield clip.

 

The SD modules using the standard D-SUB, male or female connectors, they are available with either screw or tension-spring PCB terminals.

The interface modules range from 9 way to 37 way with single or double connector.

A high density 15 way (VGA type) is also included to complete the family.

 

The SD-LA modules also feature a LED status display.

 

 

The FBK modules enable the assembly of pre-assembled ribbon cables with connectors (from 10 to 64 poles), typically used in BMS or PLC systems and have either screw or tension-spring PCB terminals.

 

The OE interface modules make use of the EDAC "hermaphrodite" multi-pole plug (Series 516) on screw connections. This results in excellent shock and vibration resistance. The offset arrangement of the connector means that the neighbouring modules will not be impaired. The EDAC connector is compatible with the ELCO 8016 connector series

 

Read more
  • Compact din rail mount modules
  • RJ45, RJ11 and USB options
  • Industrial Ethernet (SPE)
  • D-Sub and D-Sub HD, male & female
  • Screw or tension spring connections

Selected variant

Selected variant

Specifications

Connection type Screw
Connector type Ribbon cable, EN 60603-13
Contamination degree 2
Country of origin NL
Cross section single wire from 0,2 mm²
Cross section single wire to 2,5 mm²
Cross section stranded with ferrule from 0,2 mm²
Cross section stranded with ferrule to 2,5 mm²
Current carrying capacity per channel max 1 A
DIN-VDE Spec DIN VDE 0110 / EN 50178
Height TS 35/7.5 61 mm
Length 47 mm
Number Of Connections 1
Number Of Poles 10
Operating temperature from -20 °C
Operating temperature to 50 °C
Overvoltage category III
Pack Size 1
Power Supply ACDC max 125 V
Stripping Length 7 mm
Tariff code 85369010
Test voltage eff 0,67 kV
Torque 0,6 Nm
Weight 63,28 g
Width 47 mm

Product description

 Interface modules allow you to connect standard pre-moulded cable connector sets onto screw or tension-spring PCB terminals.  

 

The connections of the multi-pole or high-pole connectors are configured one to-one to the PCB – from the individual wires via connectors to pre-assembled cables. This means the  assembly time and associated costs are reduced.

 

The compact design of the interface modules, and the clear terminal labelling, and their simple assembly on TS 32 or TS 35 rails, this system represents an attractive alternative to a pure individual wire approach.

 

RJ 45 and USB use the standardized RJ45 Ethernet and USB connectors from computer components, Ethernet ready devices or modems and have screw PCB terminals.

The RJS45-SH is even more compact and uses push in connectors and has the added spring shield clip for locally grounding the cable.

A new adddition to the range is the Industrial SPE (single Pair Ethertnet) interface with spring shield clip.

 

The SD modules using the standard D-SUB, male or female connectors, they are available with either screw or tension-spring PCB terminals.

The interface modules range from 9 way to 37 way with single or double connector.

A high density 15 way (VGA type) is also included to complete the family.

 

The SD-LA modules also feature a LED status display.

 

 

The FBK modules enable the assembly of pre-assembled ribbon cables with connectors (from 10 to 64 poles), typically used in BMS or PLC systems and have either screw or tension-spring PCB terminals.

 

The OE interface modules make use of the EDAC "hermaphrodite" multi-pole plug (Series 516) on screw connections. This results in excellent shock and vibration resistance. The offset arrangement of the connector means that the neighbouring modules will not be impaired. The EDAC connector is compatible with the ELCO 8016 connector series

 

Accessories

Articles Number Of Poles Weight Width
10
63,28 g
47 mm
26
134 g
77 mm
40
214,5 g
113 mm

Selected variant

Select a variant in the list

Contact us

Please contact us for more information.

Send e-mail Send e-mail