CROUZET CONTROL
1 phase over/under voltage relay HUL, HUH
HUL and HUH control relays are used for monitoring 1-phase AC/DC voltages. The relay automatically detects the form of voltage that is to be measured. The relay requires a supply voltage. Using a rotary switch, selection can be made between over- or under-voltage, with or without memory. The switch position and consequently the control relay's function mode is detected when the operating voltage is switched on. If the switch is in the wrong position, the relay will remain deactivated and the LEDs will flash to indicate incorrect setting. If the switch position is changed during operation, all LEDs begin to flash but the unit will continue to function normally with the voltage set at the most recent power connection. The LEDs return to normal function when the switch has been returned to its original position, which was set before the first power connection. The limit value for over- or under-voltage is set with a potentiometer that is scaled in the percentage of the voltage range that is to be monitored. The hysteresis value is similarly set with a scale from 5-50 % of the set limit value. The hysteresis value cannot exceed the measurement range's limit value. Both relays are equipped with a time delay (Tt) to ignore temporary voltage deviations. Green LED (Un) indicates supply voltage OK. Yellow LED (R) indicates active relay output.
Without memory | With memory |
|
|
1: Limit value | 1: Limit value |
2: Hysteresis | 2: Hysteresis |
3: Over-voltage | 3: Over-voltage |
4: Under-voltage | 4: Under-voltage |
5: Activation of operating voltage | 5: Activation of operating voltage |
6: Monitored voltage | 6: Monitored voltage |
7: Time delay (Tt) | 7: Time delay (Tt) |
Technical data
Supply voltage | 24-240 V AC/DC 50/60 Hz ±10 % (wide range input voltage) | ||
Galvanic isolation | Yes, operating voltage measurement | ||
Power consumption | 3.5 VA AC/0.6 W DC | ||
Adjustable limit value | 10-100 % | ||
Adjustable hysteresis | 5-50 % | ||
Time delay (Tt) | 0.1–3 s ±10 % | ||
Time delay, start-up | <600 ms (static) | ||
Output relay | Max. breaking current 5 A (2 change-over contacts) | ||
Temperature | -20 °C to +50 °C | ||
Weight | 130 g | ||
Approval |
| ||
Mounting | DIN rail | ||
Measurement range, HUL | E1-M | E2-M | E3-M |
Adjustable range | 0.2-2 V | 1-10 V | 6-60 V |
Input resistance | 6 Ω | 30 Ω | 180 Ω |
Max. continual overload at 25 °C | 10 V | 30 V | 150 V |
Measurement range, EUH | E1-M | E2-M | E3-M |
Adjustable range | 15-150 V | 30-300 V | 60-600 V |
Input resistance | 150 Ω | 300 Ω | 600 Ω |
Max. continual overload at 25 °C | 250 V | 500 V | 700 V |
Dimensions
|
Connection
|
F1: Fast-blow fuse 100 mA (recommendation) |
Order number
Order no. | Description | Supply voltage |
84872120 | HUL voltage control, over-/under-voltage 0.2-60 V AC/DC | 24-240 V AC/DC |
84872130 | HUH voltage control, over-/under-voltage 15-600 V AC/DC | 24-240 V AC/DC |
- Two modules, HUL 0.2-60 V, HUH 15-600 V
- Galvanic isolation control/measurement
- Automatic detection of ac or dc
- 35 mm cabinet with DIN rail
Selected variant
Specifications
| Approvals | CE, CSA, RoHS, UL |
|---|---|
| Breaking capacity | 5A, 250V AC/DC |
| IP Class Connection | IP20 |
| IP Class Housing | IP30 |
| Measuring range E1-M | 0,2-2 V |
| Measuring range E2-M | 1-10 V |
| Measuring range E3-M | 6-60 V |
| Output | Relay 2 pole C/O |
| Supply voltage | 24-240V ac/dc |
| Temperature range bearing, from | -40 °C |
| Temperature range bearing, to | 70 °C |
|---|---|
| Temperature range from | -20 °C |
| Temperature range to | 50 °C |
| Threshold Adjustable from | 10 % |
| Threshold Adjustable to | 100 % |
| Time Delay On Crossing The Threshold | 0,1-3s |
| Time Delay Start | 0,6 s |
| Weight | 130 g |
Product description
HUL and HUH control relays are used for monitoring 1-phase AC/DC voltages. The relay automatically detects the form of voltage that is to be measured. The relay requires a supply voltage. Using a rotary switch, selection can be made between over- or under-voltage, with or without memory. The switch position and consequently the control relay's function mode is detected when the operating voltage is switched on. If the switch is in the wrong position, the relay will remain deactivated and the LEDs will flash to indicate incorrect setting. If the switch position is changed during operation, all LEDs begin to flash but the unit will continue to function normally with the voltage set at the most recent power connection. The LEDs return to normal function when the switch has been returned to its original position, which was set before the first power connection. The limit value for over- or under-voltage is set with a potentiometer that is scaled in the percentage of the voltage range that is to be monitored. The hysteresis value is similarly set with a scale from 5-50 % of the set limit value. The hysteresis value cannot exceed the measurement range's limit value. Both relays are equipped with a time delay (Tt) to ignore temporary voltage deviations. Green LED (Un) indicates supply voltage OK. Yellow LED (R) indicates active relay output.
Without memory | With memory |
|
|
1: Limit value | 1: Limit value |
2: Hysteresis | 2: Hysteresis |
3: Over-voltage | 3: Over-voltage |
4: Under-voltage | 4: Under-voltage |
5: Activation of operating voltage | 5: Activation of operating voltage |
6: Monitored voltage | 6: Monitored voltage |
7: Time delay (Tt) | 7: Time delay (Tt) |
Technical data
Supply voltage | 24-240 V AC/DC 50/60 Hz ±10 % (wide range input voltage) | ||
Galvanic isolation | Yes, operating voltage measurement | ||
Power consumption | 3.5 VA AC/0.6 W DC | ||
Adjustable limit value | 10-100 % | ||
Adjustable hysteresis | 5-50 % | ||
Time delay (Tt) | 0.1–3 s ±10 % | ||
Time delay, start-up | <600 ms (static) | ||
Output relay | Max. breaking current 5 A (2 change-over contacts) | ||
Temperature | -20 °C to +50 °C | ||
Weight | 130 g | ||
Approval |
| ||
Mounting | DIN rail | ||
Measurement range, HUL | E1-M | E2-M | E3-M |
Adjustable range | 0.2-2 V | 1-10 V | 6-60 V |
Input resistance | 6 Ω | 30 Ω | 180 Ω |
Max. continual overload at 25 °C | 10 V | 30 V | 150 V |
Measurement range, EUH | E1-M | E2-M | E3-M |
Adjustable range | 15-150 V | 30-300 V | 60-600 V |
Input resistance | 150 Ω | 300 Ω | 600 Ω |
Max. continual overload at 25 °C | 250 V | 500 V | 700 V |
Dimensions
|
Connection
|
F1: Fast-blow fuse 100 mA (recommendation) |
Order number
Order no. | Description | Supply voltage |
84872120 | HUL voltage control, over-/under-voltage 0.2-60 V AC/DC | 24-240 V AC/DC |
84872130 | HUH voltage control, over-/under-voltage 15-600 V AC/DC | 24-240 V AC/DC |
Related
Push-In sockets that save both time and space
ComatReleco has launched a new series of push-in sockets specifically designed for time and space savings.
New “all-round” Syr-Line time relays by Crouzet
Crouzet has honoured the strong Syrelec time relay traditions established in the 1980s, first by Cronos and Cronos 2 series. Now, Crouzet presents the compact and extremely versatile Syr-Line series.
Relay School - Lesson 1
Can you distinguish between a bifurcated contact and a normal contact at a glance?
Fiepos — The power supply of the future
The need for flexible, modular systems shapes machine and system engineering. Decentralization of the system components has proven to be an important factor for success.
The recognized Puls quality for an attractive price
The PIANO PIC series is designed for applications that require reliable DIN rail power supplies, which are focused to deliver the most widely required customer functionalities. Our PIC units offer this simplicity without making compromises on PULS’ renowned qualities; efficiency, service lifetime, reliability and size.
New WADI cable gland series from Jacob
The new WADI product family by Jacob features a completely redesigned gland rubber, which allows extensive sealing and tightening area.
